日本SMC氣動緩沖控制氣缸 CA2B40-50J標準型

注1）中間招上面沒有列出按訂貨。
注2）適用筆劃應根據用途來確認。有關詳細信息，請參閱“氣缸型號
選擇“在*氣動2號或WEB目錄前面的問題頁面。此外，該產品的
出行程量程Q可能無法滿足規格由于偏轉等
注3）請與SMC過行程范圍W時，要考慮制造和部件號。
注4）的行程范圍桿啟動為20到1400毫米。請SMC過1400毫米招時咨詢。

日本SMC氣動緩沖控制氣缸 CA2B40-50J標準型

Note 1) Intermediate strokes not listed above are produced upon receipt of order.
Note 2) Applicable strokes should be confirmed according to the usage. For details, refer to “Air Cylinders Model
Selection" on front matter pages of the Best Pneumatics No. 2 or the WEB catalog. In addition, the products
that exceed the stroke range q might not be able to fulfill the specifications due to the deflection etc.
Note 3) Please consult with SMC for manufacturability and the part numbers when exceeding the stroke range w.
Note 4) The stroke range with rod boot is 20 to 1400 mm. Please consult with SMC when exceeding 1400 mm strokes.

NBB8-18GM50-E2-3G-3D
NBB8-18GM50-E2-M
NBB8-18GM50-E2-V1
NBB8-18GM50-E2-V1-3G-3D
NBB8-18GM50-E2-V1-M
NBB8-18GM50-E3-M
NBB8-18GM50-E3-V1-M
NBB8-18GM60-A0
NBB8-18GM60-A0-V1
NBB8-18GM60-A2
NBB8-18GM60-A2-V1
NBB8-18GM60-A2-V1-3G-3D
NBB8-18GM60-B3B-V1